|
|
| |
|
|
|
SKID MOUNTED CHEMICAL DOSING SYSTEMS
BOILER CHEMICAL DOSING SYSTEMS
HYPOCHLORITE DOSING SYSTEMS
CUSTOMISED SYSTEMS
|
| Features : |
| |
- Typical dosing systems incorporates
- Metering pumps one or more
- Metering or preparation tank-single or Multi compartmented
- Strainers on suction side
- Pressure Safety Valves
- Non return Valves
- Pressure indicators
- High or low speed motorized agitators
- Level indication
- Level switches / alarms Access platform
- Annunciated control system, ETC
|
| |
|
|
|
|
Ventilation
Exhaust
Pressurization Systems
Air Pollution Control
Dust Collection
Scrubbing Systems
Pneumatic Conveying
Vacuum Cleaning Systems
|
|
|
|
Vacuum Ejector Systems are designed & manufactured with Multistage Vacuum Systems to cater customized and all types of Vacuum requirement from Process industry. The performance testing of all the Ejectors are done in accordance with the test codes of AEI / ASME on the test bench. These Systems are available upto Six Stage Design. |
MOC : MS, CS, SS 304, SS 316, SS 316l, Titanium, Graphite & PP
|
| Below kind of Ejector Systems are offered. |
| 1) Steam Jet Ejector System |
- No Moving Parts.
- Minimum maintenance cost.
- Long working life
- Multisteam Nozzle Design for longer unitsto get better steam economy.
|
|
| 2) Liquid Jet Ejector System |
- Low operation cost.
- Ground level installation
- Small floor space requirement
- Larger heating surface
- Good heat transfer coefficient
- Low holdup volume.
|
|
| 3) Combination Vacuum System |
- Steam Jet + Liquid Jet combination
- Steam Jet + Water Ring Vacuum Pump combination
|
|
| 4) Thermocompressor |
- Principle of operation is same as that of Ejector.
- It is principally supplied for recompression of process vapours in an Evaporator.
- It is single stage ejector which act as a heart recovery unit.
- It is used to increase the steam economy in an Evaporator
|
|
|
|
|
Complete system fitted with common structure & base frame, heavy duty, sturdy design needing no “heavy” foundation.
Delta T upto 12 Deg C can be achieved by this type of cooling tower.
+Advantage against fan type cooling tower :- NO FAN-GEAR BOX-MOTOR -Fan Power saved, maintenance cost saved. NO FILLS : Assured & consistent performance, no maintenance cost.
+Advantage against Natural Draft cooling tower. : NO LOUVERS – No water spillage surrounding to cooling tower. Neat & clean surrponding, water saver. VENTURY EFFECT FOR AIR FLOW – Does not depend upon nature or wind velocity.
Single module from 10 TR to 600 TR offered.
|
|
|
|
Hot Oil / Steam operated aqua ammonia based Vapour Absorption System for Industrial Chilling & Refrigeration.
It is capable to produce -10 Deg Sub Zero temperature.
90% savings in power cost & zero maintenance.
It is made of heat exchanger & vessel type stationery equipments.
Silent chilling system is ideal for industrial application with 3 TR to 10 TR capacity at +5 Deg C to -10 Deg C for water, brine or air chilling.
|
|
|
Zero effluent discharge system is based on Psychrometric effluent water evaporator operated by waste heat having temperature as low as +50 Deg C.
Psychrometric evaporator is economical, effective & efficient with very low operating & maintenance cost ideal for non-tretable effluent with high BOD-COD & TDS ratings.
|
|
