Home
Contact us
 

HORIZONTAL SPLIT CASING PUMPS

  • Better Performance & Higher Efficiencies.
  • Stable head and Non over loading Power Characteristics with better Suction Capabilities.
  • Greater interchangeability and ease of maintenance.
  • It allows easy access to facilitate maintenance and inspection of rotor assembly without disturbing pipe connectors and prime mover.
  • Suction and discharge connections are cast with lower casing for ease of maintenance.
  • Impellers are dynamically balanced and are placed back to back in double stage pumps of HH and QH designs for balancing axial hydraulic thrust.
HORIZONTAL SPLIT CASING PUMPS
Capacity : Upto 4000 M3/HR
Head : Upto 180 Mtrs.
MOC : Standard Cast Iron or bronze impellers fitted with high tensile steel shafts optionally stainless steel, cast steel, Ni-resist casings with shafts in stainless steel.
Applications : Air-Conditioning, Fire-Fighting, Irrigation, Water supply schemes, Industrial water supply, Oil refineries and Fertilizer plants, Mines, Steal and Cement plants, etc.

MULTISTAGE PUMPS

  • Single suction, Radially split, Horizontal shaft design high pressure pumps.
  • Manufactured as compact design unit built up from a number of stages held together by tie bolts along with suction and discharge branches.
  • Rotating elements are statically & dynamically balanced.
  • In this design, pumps are provided with inbuilt Hydraulic Balancing Device for balancing axial thrust. High tensile steel shaft, accurately machined & ground, is supported by antifriction bearings, which takes residual axial and radial thrust.
  • While pumping high temperature liquids from 90-140 deg C, cooling jacket is provided for stuffing box.
MULTISTAGE PUMPS
Capacity : Upto 700 M3/Hr
Head : Upto 410 Mtr
MOC : CI, CS, SS
Applications : General water supply -Mine dewatering -Water supply to high rise buildings - Fire fighting - Sprinkler Irrigation - Boiler feed - Booster plants, Etc.

NON CLOG PUMPS
   

MIX FLOW PUMPS

  • Single stage end suction back pullout horizontal or vertically mounted pumps.
  • Suction branch is axial, discharge branch can be arranged for horizontal / vertical orientation.
  • Casing is axially symmetrical and is provided with feet.
  • Impeller is designed with semi axial blades and small number of blades allow large cross section of water passage thus making the pumps suitable for handling liquids with solids of substantial sizes.
MIX FLOW PUMPS
Capacity : Upto 3500 M3/Hr
Head : Upto 40 Mtr.
MOC : CI, CS, SS, etc
Applications :
Pumping of clean, turbid or slightly contaminated liquids against medium and low heads in water works. Sewage, Irrigation and Drainage

VERTICLE SUMP PUMPS

  • Vertically suspended , single stage pumps with closed or open impeller for wet pit or dry pit applications.
  • Driven by a flanged motor through a well designed drive shaft assembly built in segments coupled together and supported in a column pipe with spiders spaced not more than 1.5 metres apart.
  • Each spider is provided for lubrication which can be arranged for self liquid, external sealing with water, oil or grease Vertical load is supported on motor stool provided with thrust bearings.
  • Delivery pipe runs parallel to the column pipe and these pumps can be installed on sumps upto 6 meter deep.
  • It requires no priming and can be arranged for automatic start and stop operation between specified levels.
VERTICLE SUMP PUMPS
Capacity : Upto 2000 M3/Hr
Head : Upto 60 Mtr.
MOC : CI, CS, SS, Etc.
Applications :
Industrial and Municipal Waste - Sump drainage -Process industry -Automotive Paint Booths, Etc.

VERTICLE INLINE PUMPS BACK
     
SUBMERSIBLE SEWAGE PUMP
  • Non-Clog submersible sewage pumps offer simple, the most economical and most reliable way of solving the pumping and disposal of sewage containing suspended solids.
  • These compactly designed pumps having pump below and a motor above are easy to handle and can be installed permanently with the help of automatic couplings in a small sump from where sewage is to be pumped or can be used for portable duty.
  • These pumps have as standard equipment double mechanical seals which seal off the motor from the pump section. The seal has seal faces made of Silicon Carbide for long life. The design of the oil chamber ensures efficient cooling of the seal
SUBMERSIBLE SEWAGE PUMPS
Capacity : Upto 1400 M3/Hr
Head : Upto 65 Mtr.
Solid Handling Size : Upto 150 MM
Power range : 1.5 HP to 200 HP.
Stage : Single / Two
Portable Submersible Sewage Pump : This economic model is available from 0.5 HP to 7.5 HP.
SUBMERSIBLE SEWAGE PUMPS
Applications : Drainage and Sewerage Systems, Effluents with Slurry and solids, Transfer of Sludge and Suspended Solids, Building Construction sites, Mines, etc.
 
 
Home | About Us | Product | Contact Us | Enquiry
Designed & Hosted by : GID & Promoted by : MID